Jeff Carlisle designer and manufacturer of the Imagination Xpress no longer offers these dies for sale however has all the materials on hand for you to build your own.

Die design is not limited to the following designs. Please call for custom ideas. All of these dies are for working hot metal only! Dies are designed for working material 3/8" and thicker only! Call Jeff  at: 406-452-1246 or 1-800-378-1246, Swains Spring Service, Great Falls, MT.

Tell them you heard about it on this site and I will get brownie points

dieholder2.GIF (5091 bytes)
Die sets

Smoothing and Flatting Die

squaring2.GIF (8346 bytes)
Squaring Die
squaringdie2.GIF (10096 bytes)


Shoulder Die
shoulder2.GIF (9727 bytes)
Dies Page Two

Hydraulic Press | Dies | Dies 2 | H-Frame | Press Gallery | Press Gallery 2 | Press Gallery 3 | PressGallery 4

 

Home|Bookstore|Available|Feedback|Back

Don Fogg Custom Knives
Copyright © 1997 Don Fogg Custom Knives. All rights reserved.
Revised: October 18, 2003.